ABB RCNA-01 Uživatelský manuál stáhnout pdf (Strana 221)

Parameter listing and descriptions 217

ACH550-01 User's Manual

2013 MIN TORQUE SEL -6…7

Defines control of the selection between two minimum torque limits

(2015

MIN TORQUE 1 and 2016 MIN TORQUE 2).

0 =

MIN TORQUE 1 – Selects 2015 MIN TORQUE 1 as the minimum limit

used.

1 =

DI1 – Defines digital input DI1 as the control for selecting the

minimum limit used.

• Activating the digital input selects

MIN TORQUE 2 value.

• De-activating the digital input selects

MIN TORQUE 1 value.

2…6 =

DI2…DI6 – Defines digital input DI2…DI6 as the control for

selecting the minimum limit used.

•See

DI1 above.

7 =

COMM – Defines bit 15 of Command Word 1 (parameter 0301) as the

control for selecting the minimum limit used.

• The Command Word is supplied through fieldbus communication.

-1 =

DI1(INV) – Defines an inverted digital input DI1 as the control for

selecting the minimum limit used.

• Activating the digital input selects

MIN TORQUE 1 value.

• De-activating the digital input selects

MIN TORQUE 2 value.

-2…-6 =

DI2(INV)…DI6(INV) – Defines an inverted digital input DI2…DI6

as the control for selecting the minimum limit used.

•See

DI1(INV) above.

2014 MAX TORQUE SEL -6…7

Defines control of the selection between two maximum torque limits

(2017

MAX TORQUE 1 and 2018 MAX TORQUE 2).

0 =

MAX TORQUE 1 – Selects 2017 MAX TORQUE 1 as the maximum limit

used.

1 =

DI1 – Defines digital input DI1 as the control for selecting the

maximum limit used.

• Activating the digital input selects

MAX TORQUE 2 value.

• De-activating the digital input selects

MAX TORQUE 1 value.

2…6 =

DI2…DI6 – Defines digital input DI2…DI6 as the control for

selecting the maximum limit used.

•See

DI1 above.

7 =

COMM – Defines bit 15 of Command Word 1 (parameter 0301) as the

control for selecting the maximum limit used.

• The Command Word is supplied through fieldbus communication.

-1 =

DI1(INV) – Defines an inverted digital input di1 as the control for

selecting the maximum limit used.

• Activating the digital input selects

MAX TORQUE 1 value.

• De-activating the digital input selects

MAX TORQUE 2 value.

-2…-6 =

DI2(INV)…DI6(INV) – Defines an inverted digital input DI2…DI6

as the control for selecting the maximum limit used.

•See

DI1(INV) above.

2015 MIN TORQUE 1 -600.0…0%

Sets the first minimum limit for torque (%). Value is a percentage of the

motor nominal torque.

Code Description Range

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 473 474

Komentáře k této Příručce

Žádné komentáře

ABB RCNA-01 Uživatelský manuál Strana 221

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola ABB RCNA-01